We Got a Convoy!

 Or more of one anyway.

While I was painting the Opel Blitz, I started thinking about more vehicles I might need for some Raiders of the Lost Ark gaming. Motorcycles were a definite must. And one with a sidecar. So I started looking around on the Interweb.

A search for Warlord Games DAK motorcycles turned up a result for $9, which seemed like a pretty good price. The motorcycle and sidecar was $12. There was also a Kubelwagen for $18, so I threw that in the cart as well.

When they arrived, they were in clamshells and were all metal. Must have been why they were so cheap. Then I looked at the backer card in the package and discovered that I had ordered models made by Offensive Miniatures, not Warlord.

The mistake had been made. So I figured I'd give them a try.

I opened the Kubelwagen. The first thing I noticed was, "Parts, Mr. Rico, millions of them." OK. There were only about a dozen.

The second thing I noticed was that there were no assembly instructions. There weren't any online, either. But a look at the photos on the website showed what most of the parts were and gave me a general idea of where they went.

I decided to add the passengers before painting, since some of the parts would make fitting them in afterward a problem. The gun rack in the back seat and the steering wheel were two of the worst offenders.

Assembly was a little rough. As with a lot of metal models, some parts were slightly misaligned or twisted. The most frustrating part was the connection points. They were not well defined and, in some cases, were practically non-existent.

Patience and a liberal dose of colorful language persevered. I think.

And the Kubelwagen was assembled.

Things were fairly straightforward from there. I painted the base colors, then gave everything a wash to bring out the details.

Next, I added the highlights.

I scrounged and cobbled together some decals from the other vehicle sets and applied them. Then I added some chipping and rust. Finally, it was weathered with Vallejo dust and mud pigment powders.

There are a few things to be aware of if you decide to purchase one for yourself. First, it is scaled slightly smaller than the Warlord Games miniatures. The passengers are close to the same height, but noticeably slimmer. The other issues I've already covered: assembly, lack of decals, and so on.

For about half the price of the Warlord version, though, it turned out to be a nice addition to the DAK/Lost Ark project.

 

 Discovering the Ark of the Covenant

    I have been sorting through games and miniatures in my basement, deciding what I want to keep and what to sell. In a dusty box on the corner of a shelf, I discovered that I had inherited the lost Ark of the Covenant from a friend's collection.

    Of course, when one finds the lost Ark, and one has recently purchased the Pulp Alley rules, one needs to start putting his DAK pile of potential to use.

    I decided to start with a Warlord Games' Opel Blitz to transport the troops and, naturally, the Ark.

    Assembly began. Once again, I had to make some decisions regarding which parts to paint before gluing the cab and bed together. I also started assembling the passengers.

    Credit where credit is due, the parting of these soldiers for mold making was pretty darned good. There are only minor gaps between a few parts, and the instructions made their placement clear. The legs, arms and weapons have to go in specific places, but there is a variety of heads, and they can be positioned in natural poses.

    I completed the subassemblies, primed them and painted the interior. The truck was then assembled, painted in the base colors and washed with a dark brown stain.

    While that work dried, I turned my attention to the passengers. They were painted in their base colors and washed with the brown stain.

    At this point, I added the highlights to the truck and soldiers and did some preliminary weathering on the model.

    Decals were applied, followed by some additional weathering, mud, dust and rust. The final step was to put the windshield in.

    This was a piece of acetate that resisted being glued to the frame with the recommended styrene plastic cement. I tried superglue on another cutoff piece, but the resulting bond was not secure. In the end, I settled for press fitting the windshield between the steering wheel and the frame of the truck. I'll need to handle it with a bit of care, but I'm calling it done.

    Minor annoyances aside, this was another fun build with several lessons learned and more practice with new techniques. I have about a platoon of infantry left from the DAK starter army box, and I've purchased motorcycles with and without sidecars to add some variety. I'm looking forward to getting these on the table for a few games of Pulp Alley.

Rebuilding Highlander Studios

    Life takes some strange turns. Over the last several years, I have been working full time as a primary care giver, managing a community garden, and sitting on the local planning commission. I have just recently been able to get back to painting and sculpting. I'd like to thank all of you who have poked me during this time to see what I was working on and how I was doing.

    The care giver job has a definite end in the foreseeable future. I am shifting my focus back to sculpting and painting miniatures and am looking to build my clientele again. I'd appreciate your consideration if you have projects you would like to have done.

    Thanks. And have a great day!

 My Beef With the Greif

    Early this spring, I purchased Warlord Games' 250 German halftrack model. My first beef is not with Warlord Games; it is with the seller. Warlord boxes are pretty flimsy, and this was shipped in a soft envelope rather than a box. It arrived slightly crushed.

    This irritates me on a very basic level. When I buy something new, I expect it to arrive in pristine condition. I don't always build my models, and I sometimes resell them if I decide not to continue with a project.

    I have some leftover DAK infantry from a starter army, so I decided to build this one as Rommel's Greif command halftrack. This led to the discovery of my second beef, this one firmly the fault of Warlord.

    The crew for the halftrack is really small and poorly proportioned, nothing like the "heroic" proportions of the big heads and hands and squat bodies of their standard WWII fare. Rommel and one crewman actually look like dwarves, and the radio operator is a halfling buddy they brought along to cram into the floor of the vehicle.

    The third and final beef is again with the shipping. While cutting the parts from the sprues, I found that the rear panel of the halftrack around the door had been bent and would not fit properly. A few minutes with a heat gun and some creative cursing, and it was straightened well enough to continue. I did partial assemblies, leaving the interior accessible for painting.

    The interior painting went well enough, with the exception of a minor user error. When I test-fit the top and bottom, I realized that I had forgotten to paint the upper interior. More painting ensued, and while the wash on these parts was drying, the demi-human crew was painted.

    The only hangup with the final assembly was filling the gaps left by the warped upper hull. A little bit of putty and some smoothing, and I was ready to mask the interior and prime the beast.

    Next, I painted the basic colors, added a wash and a highlight to the vehicle, and test-fit the crew. The final beef was discovered at this stage. The two crewmen fit in well. They are snug, but they stand on the decking correctly. There is no proper way to fit Rommel with his feet on the deck. He ends up balanced on top of the back of a seat. Probably due to the fact that he's a dwarf.

    At this point, all that was left was to add the decals and weather the model. Positioning the Greif wording was a little tricky. Some Vallejo weathering powders were added for dust and mud, and a spray of flat sealant completed the build.

    Sure, I have some issues with the manufacturing and shipping of this model, but all in all, this was a really fun project, and I like the look of the end product. The assembly and fit of most parts are well thought out, and the instructions are clear. It will make a fine addition to the DAK troops when they arrive on the gaming table.